Diesel Rail Services
Recommendations for Operational Measures
- Parked train management is a very promising operational measure with a high saving potential (2% to 5%) and comparably low investment costs. In mainly focuses on a more efficient load and temperature management for parked trains and can be realized as a first stage by low tech measures. More complex systemic solutions require higher investments and a higher organisational effort because established processes and habits have to be changed.
- Eco driving (levels 1 and 2) is highly promising, like for the other types of power supply. It has a saving potential between 2% and 6% depending on the actual operational regime and on the level of sophistication of the introduced system.
- Energy efficient traffic management (eco-driving level 3) will allow significant reductions in energy consumption in the railway system (between 10% and 14%). These values are valid for DMU and EMU. The implementation of such systems requires a high degree of cooperation between the different stakeholders - infrastructure managers, train operating companies, rolling stock and signalling equipment manufacturers and standardisation bodies and safety authorities. The needed joint effort goes clearly beyond the "business as usual" scenario. A reasonable degree of standardisation is needed in order to guarantee swift progress in this field.
The following figure gives an overview over the qualitative dependence of level of complexity and amortization time for promising operational measures and thus represents an implementation perspective for energy saving measures:
Qualitative dependence between level of complexity and time frame for implementation time of operational measures
Recommendations for Rolling Stock Measures
- The UIC/UNIFE TecRec 100_001 "Specification and verification of energy consumption for railway rolling stock" should be used for all new projects in the tendering process as basis for prediction and evaluation of the energy performance of new technologies or design options.
- Motor flux management is a very promising efficiency technology with a saving potential at system level between 2% and 4% for diesel-electric propulsion systems. Since it can be mostly done by software changes only or by minor hardware changes, it is very profitable and has a low payback time.
- To implement an on-board energy storage system in a DEMU is a very promising solution. The system’s innovative ultracapacitors store the energy released each time a vehicle brakes and reuses it during acceleration or operation. It boosts a vehicle’s performance by adding extra power during acceleration. This highly successful solution saves up to 35% in multiple diesel units. This, in turn, reduces emissions and costs.
- The Permanent Magnet motor technology improves overall vehicle optimization, increases motor efficiency and reduces motor volume and weight which is relevant for diesel-electric propulsion systems. Compared to inductor motors of the same size, this compact and powerful PM motor system: using less energy, facilitates motor cooling, improves motor performance and reduces vehicle life-cycle cost. Saving potential is up to 4% and can be used for DEMU and Diesel electric locos.
- A combination of on-board energy storage with PM technology increases the saving potential and is a very promising approach for energy saving.
- To use the waste of the cooling circuit of the diesel engine for heating is a proven technical solution and already state of the art in DMUs. Up to 3% of the fuel consumption can be saved.
- Equally promising is the energy management of auxiliaries (MV load management). Investment costs and complexity of changes are comparably low resulting in short payback times. Saving potential is between 2 and 6%.
- Medium frequency energy distribution is an interesting technology to follow. It has an energy saving potential between 1% and 6%. Investment costs are relatively high and some open questions (e.g. integration) still have to be solved.
- Most of the promising efficiency technologies mentioned above can be applied also during refits for existing rolling stock. Examples are motor flux management and management of auxiliaries. Since they are highly profitable and have short payback times, they can be also applied to rolling stock with a shorter remaining life time.
Qualitative dependence between level of complexity and time frame for implementation of technologies in Diesel Multiple Units and Diesel locos